The Profile RDA from Wotofo is an innovative rebuildable dripper that comes paired with a squonk pin, and features a deck that can accommodate both mesh wire and regular rebuildable coils. It is a collaboration between rebuildable masters Wotofo and Youtuber #Mr.JustRight1.
The dripper comes with a spring-loaded ceramic cotton support system, which means your juiced cotton won't drop with weight. This enables the cotton to always stay in contact with the mesh wire, which sits over the top of the wicking.
Airflow comes from the beehive design, which passes air in from the sides and pushes it past the coils for dense flavour. The build deck has two posts, both of which are clamped in place by hex screws.
The included mesh coil sheets register 0.18 ohms and run best between 40 to 60 watts. It can be used on either squonk mods or regular mods.
Kit Includes:
- Wotofo Profile RDA
- 6mm Agleted Cotton Strip
- Clapton Coils
- Mesh Coil Sheets
- Extra O-rings & Screws
- Extra 810 Drip Tip
- Bending Tool
- User Manual
Features:
- Can use mesh or regular coils
- 24mm diameter will fit most mods
- Comes with both mesh wire and a regular coil
- Comes with two drip tips
- Spring-loaded ceramic deck pushes cotton against mesh wire
YOU WILL ALSO NEED:
| REQUIRED (Sold Separately) |
Specifications
- Size: 24mm diameter x 32.5mm
- Mesh Coil Material: Kanthal A1
- Mesh Coil Size: 16mm x 6.8mm
- Mesh Coil Resistance: 0.18 ohms
- Mesh Coil Recommended Wattage: 40-60W