This is the updated RX2/3 mod, not the original RX200 or RX200S mod.

The Wismec Reuleaux RX2/3 is a unique design mod that takes THREE 18650 batteries (not included). It can also be used with two batteries and the included two-battery backing plate. It's capable of 150W of power with two batteries, or 200 watts with three batteries.

It has Temperature Control for Nickel, Titanium and Stainless Steel coils, and upgradeable firmware.

Features:

Size: 50.0mm*40.0mm*84.0mm
510 thread
Takes three 18650 battery (sold separately) **discharging current should be above 25A
Output mode: TC-Ni/TC-Ti/TC-SS/VW mode
Output wattage: 1 - 200w
Temperature range: 100 - 300å¡C / 200 - 600å¡F (TC mode)
Resistance range: 0.05-1.0ohm(TC Mode) / 0.1-3.5ohm (VW MODE)
0.96 inch OLED screen

This device requires THREE 18650 batteries. Batteries sold separately and can be found here.

Warning:

The Wismec Reuleaux RX2/3 is for advanced users only. An understanding of mods, battery safety and basic electronics is required to safely use this device.

Always marry up your batteries - use three batteries of the same brand mAh and amp limit.

Also check the battery polarity position before installing/reinstalling your battery to avoid damage to your device. Using poor 18650 batteries will cause damage to your device and could pose a safety risk.