The Touch 150W is a brand new touchscreen device from Tesla. Now your vape is as smart as your phone!
Featuring a large 2.4 inch IPS LCD display and 320 x 240 pixel screen resolution, you can adjust your mode, wattage, temperature etc. directly from the screen. It has a vibrant full colour display as well as customisable wallpapers.
The device itself runs from 7 to 150 watts with coils from 0.1 ohms up to 3 ohms. It features Temperature Control support for Nickel, Titanium and Stainless Steel coils down to 0.05 ohms, and between 200 and 600 degrees Fahrenheit.
The Tesla Touch 150W runs on two external 18650 batteries (NOT INCLUDED). These batteries run in SERIES, meaning that your available voltage is increased from 3.2-4.2V per battery to a total of 6.4-8.4V. Your battery capacity (MAH) remains the same as a single battery when running in series mode. You can NOT charge the batteries on-board with this mod, so you will need an external 18650 battery charger.
This device requires two 18650 batteries. Batteries sold separately and can be found here.
The Tesla Touch 150W TC Touchscreen Mod is for advanced users only. An understanding of mods, battery safety and basic electronics is required to safely use this device. Always marry up your batteries - use two batteries of the same brand mAh and amp limit.
Also check the battery polarity position before installing/reinstalling your battery to avoid damage to your device. Using poor 18650 batteries will cause damage to your device and could pose a safety risk.